Saturday, March 29, 2014

The Roof, The Roof, The Roof Has No Panels!

We finally spotted land at around Noon!
The view of Sopris is awesome!!



Photography provided by Benjamin Strauss, "Post"er Child, "Blogs" and cats playing together!!!

Thursday, February 6, 2014

Trevor G. Potter ENY 121 SOLAR PHOTOVOLTAIC COMPONENTS Jan. 27th 2014

Trevor G. Potter
ENY 121 SOLAR PHOTOVOLTAIC COMPONENTS
Jan. 27th 2014 

I need to install some electric heat tape this summer and would love to make it solar powered, i'm fairly certain it can be done.

Monday, February 3, 2014

Ha Ha Ha!!! Enjoy! Courtesy of Benjamin P. Strauss


Benjamin Strauss here, this craziness in Spain produces electricity even at night!!


Gemasolar is the first commercial-scale plant in the world to apply central tower receiver and molten salt heat storage technology. The relevance of this plant lies in its technological uniqueness, since it opens up the way for new thermosolar electrical generation technology.
Characteristics of Gemasolar:
  • Rated electrical power: 19.9 MW
  • Net electrical production expected: 110 GWh/year
  • Solar field: 2,650 heliostats on 185 hectares
  • Heat storage system: the molten salt storage tank permits independent electrical generation for up to 15 hours without any solar feed.
The prolongation of the plant's operating time in the absence of solar radiation and the improvement in efficiency of the use of the heat from the sun makes Gemasolar's output much higher than that which is delivered by other technologies in a facility with the same power.
The notable increase in the plant's power efficiency guarantees electrical production for 6,500 hours a year, 1.5 to 3 times more than other renewable energies. The plant will thus supply clean, safe power to 25,000 homes and reduce atmospheric CO2 emissions by more than 30,000 tons a year.
The power generated by Gemasolar will be sent through a high-tension line to the substation of Villanueva del Rey (Andalusia, Spain), where it will be injected into the grid.

Central tower technology:

The inclusion of a novel molten-salt heat storage system permits the production of electricity in the absence of solar radiation.
The heat collected by the salts (capable of reaching temperatures above 500ยบ) generates steam and produces electrical power. The surplus heat accumulated during sun hours is stored in the molten-salt tank.
In this way, Gemasolar can produce electrical power 24 hours a day for many months of the year.

Related image: (Click here to watch the enlarged image

gemasolar    gemasolar    gemasolar    gemasolar    gemasolar

Tuesday, January 28, 2014

Trevor G. Potter ENY 121 SOLAR PHOTOVOLTAIC COMPONENTS Jan. 27th 2014 solar fortress of solitude

Trevor G. Potter
ENY 121 SOLAR PHOTOVOLTAIC COMPONENTS
Jan. 27th 2014

The first house I owned was south of Breckenridge Co. and just outside of the highest town in the nation, Alma Co.  The house was in Placer Valley and was situated on a sunny mountain side at about 11,100 ft elevation. Man that was some serious solar potential. The passive solar heating through the 80% glass front was awesome. If I still owned the home I would go completely of the grid and be self sustained. And that is my latest goal, to get another similar home or cabin and create a self sustained solar fortress of solitude, friends and family invited of course...Trevor G. Potter

Monday, September 23, 2013

House in Leadville

I remember my house in Leadville, Co. It faced Mt. Elbert and we would get around 300 sunny days. It was awesome because it didn't take much to heat the house! Also, the snow we did get was almost like an insulation barrier. We had built the house from the ground up, it took a long time, but I was so much more appreciative of it because of all the hard work. The only thing I wish I had added was solar energy. This post reminded me a lot of that house. Kimberly Tracey

Monday, September 16, 2013

PV Fire hazards

Troy Marquard

I though it would be interesting to note can the PV catch on fire? California has tracked several of these fires with their investigation results summarized. The conclusions are that the majority of the fires started were caused by "other system" components. In short this relates to the quality of the installation. See pages 16 and 17 for a listing of fires around the state.
If the link does not open try opening it in a new browser.

http://osfm.fire.ca.gov/training/pdf/Photovoltaics/Fire%20Ops%20PV%20lo%20resl.pdf